Set the post into the hole and attach 2x4 braces to adjacent sides of the post. Use a level to position the post perfectly vertical. Fill the hole with Fast-Setting Concrete up to 3 to 4 inches below ground level. Pour about a gallon of water per 50 lb bag into the hole and allow the water to saturate the concrete mix.

.

Keeping this in consideration, how much concrete do you put in a post hole?

Related To:

  1. The general rule of thumb when setting a post is that the depth of the post's hole needs to be 1/3 to 1/2 of the actual above-ground height of the post.
  2. Now that you've determined the size of the hole you'll need, you can use the chart below to determine how many 50-pound bags of concrete you'll need.

Subsequently, question is, how many bags of cement do I need for a fence post? Also 1-1/2 bags per hole is about right for a 4x4 fence post. Also remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6' above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

Considering this, how do you mix cement for fence posts?

In terms of the ratio to use for a concreting fence posts, the best mix is a mix of 1:2:4 (1 cement, 2 sand, 4 aggregate). Concrete is always best mixed using a cement mixer to ensure it's even, but if you only need to mix a little, hand mixing is ok (see mixing concrete project above for tips on how to do this).

Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post's aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

Related Question Answers

How many bags of concrete do I need for a 4x4 fence post?

Also 1-1/2 bags per hole is about right for a 4x4 fence post. Also remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6' above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

How big of a hole do I need for a 4x4 post?

Dig an 8"-diameter hole at least 6" deeper than your area's frost line for each 4x4 post, using a power auger, hand auger, or post-hole digger. A 6x6 post requires a 10"-diameter hole. Shovel a 6" layer of gravel into the hole to provide drainage.

How do you backfill a fence post?

Use a mix of crushed gravel and soil to backfill the hole around your new post - compacting the soil every 4-6 inches as you go.
  1. Dig your hole to a depth appropriate for the height of the post.
  2. Place a pre-cast concrete biscuit (block).
  3. Place your post in the hole and backfill with dirt.

How do you install a 4x4 fence post?

Method 1 Setting the Post in Soil or Gravel
  1. Try this method if you have dense soil.
  2. Choose a durable fence post.
  3. Prep the wood against moisture (optional).
  4. Dig the hole.
  5. Drop gravel into the hole.
  6. Position the post in the hole.
  7. Fill the hole with tamped crushed stone or soil.
  8. Finish with a small hillock.

Do fence posts need concrete?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.

How much quikrete do I need for a 4x4 post?

Remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6 feet above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground). The calculator will indicate the number of 50 lb. bags of QUIKRETE® Fast-Setting Concrete you need.

How do you dig a post hole?

To dig post holes with post hole diggers, start by holding one handle in each hand with the handles close together. Then, thrust the blades into the ground where you want to dig your first hole. Once the blades are in the ground, spread the handles apart so the jaws of your post hole diggers close around the dirt.

What is the best cement for fence posts?

Quikrete 50 lb. Fast-Setting Concrete Mix is a special blend of fast-setting cements, sand and gravel. Designed to set hard in 20-40 minutes. Sets posts without mixing.

How much Postcrete do I need per post?

you will need minimum 1 bag per post. I usually use one and a half per post but I am using 25kg bags. often poscrete is in 20kg bags so 2 per post is more likely.

Can I pour concrete in a hole full of water?

Yes, you can pour concrete in water. The water in the hole under the pipe can be sucked out with a wet-dry vacuum before and during the repair job.

Should pressure treated fence posts be set in concrete?

With pressure-treated posts, the rot will be slow. First, the posts should be set on top of a bed of coarse gravel 3 to 6 inches deep, so the base of the post is in contact with the gravel. Concrete should be poured around the post - no concrete under the post.

Can mortar be used for fence post?

It is ideal for setting posts such as fence posts, mailbox posts, basketball posts, deck posts, lamp posts, and swing sets. One of the concretes we sell is the Quikrete Fast Setting Concrete Mix. Mortar, which is a mixture of water, cement, and sand, has a higher water-to cement ratio than concrete.

How long does concrete take to set in a post hole?

The concrete sets up in 20 to 40 minutes, so you can quickly move on to the next stage of the project (a great convenience when setting fence posts) or backfill the hole to finish the job. Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.

Does concrete go bad?

At best, correctly-stored, unopened bags might have a shelf life of up to six months. As long as the cement is less than six months old, has no lumps and is a completely free-flowing powder, it should be okay to use for non-structural purposes. All structural jobs (ie.

How many 80lb bags of concrete make a yard?

How many 80 lb bags of concrete do I need for 1 yard? The finished volume of an 80# bag of Sacrete or Quikrete (pre-mixed cement, sand and gravel) is 0.6 cubic foot (stated on the bag). There are 27 cubic feet in a cubic yard. Dividing 27 cubic feet by the volume of the bag will give you the number of bags you need.